Best Fan Control Software

This is one of the best fan control software.

MSI Afterburner is also one of the most popular utilities for overclocking video cards.

Features:

1. Intuitive simplicity, allowing even a beginner without experience to master MSI Afterburner.
2. With this software, you can get detailed information about the current state of the video card and other components. Since we are interested in cooling, MSI Afterburner copes well here: with its help, you can adjust the rotation speed of the fans.
3. The software is free.

MSI Afterburner has 3 options for setting up enhanced cooling of the video card:

1. Fixed speed. To do this, you need to disable automatic mode and set the Fan slider to the desired speed. In this case, the coolers will always spin, for example, at 100%.
2. Automatic mode. To turn it on, you need to press the A (Auto) button in the Fan block. Now the operation of the fans will adjust to the GPU temperature.
3. Manual setting. To do this, go to “Settings” -> “Cooler” -> “Enable software user auto mode”. All you need to do is click on the graph line to add control points. Each point will correspond to a certain temperature and fan speed.

Also in MSI Afterburner you can create several fan profiles for different operating modes (for example, for gaming and everyday use) and switch between them.

FanControl is one of the best fan control software. The main advantage of this program is its performance and flexibility of settings.

Features:

1. FanControl is a free utility.
2. Does not require installation and takes up only 5 MB.
3. The program checks each fan and controls their speed and performance.
4. Setting up a speed change schedule, as well as custom speed curves.
5. Fine-tuning with step specification, start and stop rules, response time, and delay.
6. Support for various fans and temperature sensors.

FanControl has 3 main sections:

1. Controls. Here is a list of fans that the program can control.
2. Speeds. Here is displayed the speed of a particular fan that the software was able to find in the system.
3. Curves. Here you can see our settings.

SpeedFan is a very useful program that monitors the parameters of the computer’s hardware, including the speed of the coolers.

The main functions of the software:

1. Monitoring the temperature of the processor, hard drive, core, and graphics processor;
2. Checking the serial number, factory number, manufacturer, and chipset timings.
3. Creating events, for example, turning on increased fan speeds under certain conditions.
4. Checking the serial number, factory number, manufacturer, and chipset timings.

Advantages of SpeedFan:

1. Allows you to monitor many parameters separately;
2. Convenient for troubleshooting thanks to the corresponding icons next to each parameter;
3. Displaying all information on graphs;
4. No payment for use and downloading.

Disadvantages of SpeedFan:

1. Requesting administrator rights each time the program is launched;
2. Less experienced users may not immediately understand how to work in SF.

Undoubtedly one of the best fan control software.

Using Argus Monitor, you can monitor the system load and optimize applications to improve performance. Fan control is carried out in the tab with the motherboard.

It helps to monitor the voltage on various computer components, including the processor, RAM, and hard drive. With its help, users can diagnose power supply problems and prevent possible failure of the system unit.

Features:

1. The software has a license for a year (cost – 12.95 euros) and for 3 years (28.95 euros).
2. You can set fixed fan speeds or configure control curves to control them based on any temperature source, such as the temperature of the PC or GPU, the temperature of the HDD / SSD, etc.
3. There is S.M.A.R.T. monitoring.
4. There is the ability to send notifications for various events.
5. Supports fan control profiles, saves curves, etc.

Advantages:

1. This software is very easy to use: it shows temperatures at startup.
2. Supports all new motherboards.
3. Shows S.M.A.R.T. disks.

Disadvantages:

1. Argus Monitor only has a 30-day free version.
2. Direct temperature readings from the processor cores are not visible.